Home / Products / Special Cable / Content

Send Inquiry

High Temperature Silicone Cable

Name: China High Temperature Silicone Cable Manufacturers Suppliers Factory - Made in China - JSH Cable
Brand: JSH Cable
SKU: 299046655

Rated Voltage: Common: 300/500V, 600V; high-voltage versions up to 3KV – 60KV
Temperature Range: Standard: -60°C to +200°C
Special: types: up to -80°C to +300°C
Conductor Material: Mainly stranded tinned copper (good oxidation resistance and flexibility); bare copper or silver-plated copper also available
Insulation Material: Main body is silicone rubber; some versions add a fiberglass braid for better abrasion and high‑temperature resistance
Applicable Standards: Common: GB5013.3, UL758, RoHS, etc.
JSH cable High Temperature Silicone Cable factory

Send Inquiry

Introduction to EVP Automotive Cable

High-temperature silicone cable is a type of wire with silicone rubber as its insulating material, capable of withstanding high temperatures. Due to its excellent heat resistance, cold resistance, flexibility, and electrical insulation properties, it is widely used in electronics, electrical appliances, lighting, automotive, and industrial equipment.

Structure and characteristics of High Temperature Silicone Cable

Property	Typical Range	Notes
Temperature Range	-60°C to +200°C	Core advantage; stable performance under extreme temperatures
Rated Voltage	600V / 3KV / 20KV	600V for common low-voltage applications; high-voltage versions up to 20KV+
Conductor Material	Tinned copper / Bare copper	Stranded fine wires for flexibility and conductivity
Insulation Material	Silicone rubber	Aging resistant, acid/alkali resistant, flame retardant
Flexibility	Excellent	Easy to install in tight or complex spaces

High Temperature Silicone Cable Overall Structure Diagram

High Temperature Silicone Cable

Core advantages of High Temperature Silicone Cable

Key Performance Characteristics

1. Excellent Temperature Resistance

Extremely wide operating temperature range: Typically stable from -60°C to +200°C, with short‑term exposure to even higher temperatures.

Advantage over alternatives: Ordinary PVC wire operates only between about -20°C and +80°C. While PTFE (Teflon) wire also withstands high temperatures, it is much stiffer. Silicone wire does not harden or crack easily at high temperatures and remains flexible even at low temperatures.

2. Outstanding Flexibility

The conductor uses finely stranded tinned copper (e.g., 0.08 mm strands) precisely twisted, and the insulation is made of soft silicone rubber.

Small bend radius and very soft feel, making it easy to route in tight spaces, moving parts, or applications requiring frequent bending, without fatigue failure.

3. High Dielectric Strength & Insulation Reliability

The silicone rubber insulation offers high dielectric strength. Common voltage ratings are 600V, while high‑voltage versions can reach 3KV, 20KV, or even higher.

High insulation resistance and low leakage current effectively ensure electrical safety.

4. Excellent Aging & Environmental Resistance

Resistant to ozone, UV, acids, and alkalis; it does not age easily and has a long service life.

Good flame retardancy; many types meet UL VW‑1 or FT1 flame ratings and self‑extinguish.

5. High Current Carrying Capacity

Thanks to silicone rubber's heat resistance, it can carry higher current for a given cross‑sectional area compared to ordinary PVC wire, helping with device miniaturization and increased power density.

Common specifications of High Temperature Silicone Cable

Structural Dimension Parameter Table

Nominal Cross‑section (mm²)	Approx. AWG	Conductor Construction (strands/dia. mm)	Insulation Thickness (mm)	Finished Outer Diameter (mm)	Max. Conductor Resistance at 20°C (Ω/km)
0.2	24	12/0.15	0.6	1.6 – 2.0	95
0.5	20	28/0.15	0.6 – 0.7	2.2 – 2.6	40.1
0.75	18	42/0.15	0.6 – 0.7	2.6 – 2.9	26.7
1	17	32/0.20	0.6 – 0.8	2.7 – 3.0	20
1.5	16	30/0.25	0.6 – 0.7	3.0 – 3.3	13.9
2.5	14	49/0.25	0.7 – 0.8	3.6 – 3.9	8.21
4	12	56/0.30	0.8 – 1.0	4.4 – 4.7	5.09
6	10	84/0.30	0.8 – 1.0	4.9 – 5.5	3.39
10	8	84/0.40	1.0 – 1.2	6.8 – 7.5	1.95

certificate

Our Certificate

TUV

SAA

U.L

packing and shipping

packaging and shipping

01.

export packaging

Moisture prevention: A desiccant (silica gel packet) must be placed inside the coiled cable, and the humidity indicator card should be checked before sealing the film.
Fumigation: If wooden pallets or trays are used for export, they must bear the IPPC (International Plant Protection Convention) fumigation mark, otherwise they may be destroyed or subject to mandatory treatment at the destination port.
Label: The shipping mark must be firmly affixed, including the contract number, gross weight, reel number, as well as marks such as "Do Not Stack" and "Keep Dry".

02.

Multiple modes of transportation

Providing one-stop logistics services such as "door-to-port" or "door-to-door" can simplify the communication process and offer more cost-effective integrated freight rates.

JSH Cable Advantages

Advanced equipment

Advanced equipment and multiple production lines are the guarantee of our cable quality and production capacity.

Application: Our cables have been extensively used in municipal, electric power, water conservancy, steel, coal, petroleum, chemical, construction, subway, high-speed rail, airport, and other fields.

Advanced Equipment and Reliable Technology: We employ cutting-edge equipment and reliable technology to ensure the manufacturing of superior products.

Ustomer Satisfaction: Our excellent management practices, along with guaranteed quality and reliable technical support, provide customers with reliable products and satisfactory services.

Extensive Market Reach: Our products have been distributed across more than 30 provinces and regions in China and exported to over 20 countries, including Russia, Spain, and the United States.

FAQ

Q1: Are you a factory or trading company?

A1: We are a manufacturer.

Q2: Can I send you here to purchase samples of High Temperature Silicone Cable?
A2: Yes! You are welcome to place sample order to test our superior quality and services.

Q3: What is your Warranty?
A3: All the products will have 12 months Warranty.

Q4:What payment method do you accept?
A4:T/T(Bank transfer), L/C, Western Union, Money Gram, Paypal, etc.

Q5: Can you put my brand name (logo) on these products?
A5: Yes! The professional OEM services will be welcomed to us. Our factory accepts to make the logo free for
bulk orders.

Q6: May I know the status of my order?
A6: Yes .The order information and photos at different production stage of your order will be sent to you and the information will be updated in time.

Q7: What's the leading time? (How long do you need to prepare my goods? )
A7: Delivery (no more than 1000pcs) will be arranged within 3-7 days after payment, and arrive you within about 3-7 working days via international express.